DRUM RECONDITONING PLANT CONSIDERATIONS 
For a drum reconditoning plant to be fully operational up 
to a capacity of 120 drums per hour, a building land area of 
approximately 45m(L) x 45m(W) with a minimum ceiling height of 
6m is required with an electrical suppleu of 350amp voltage.
METHOD AND FLOW OF RECONDITONED DRUM 
  1. External wire brushing to remove silkscreening marking,
paper sticker and rust.

  2. Re-shape the circular rim by using chimer machine.

  3. De-dental of the drum at Test Pressure of 60 P.S.I.

  4. External washing with deagreaser to remove oil & dirt.

  5. Eight times of Internal washing of high pressure hot water
system with degreaser, chemical solution and anti-rust chemical.

  6. Hot Air Blower to remove the water in the drum.

  7. Vaccum the drum by using suction Machine.

  8. Spray painting by using stoving paint.

  9. Drums will be baked dry in the oven compartment.

  10. Q.C Inspection before delivery.
EQUIPMENT REQUIREMENTS 
In order to run 120 drum per hour reconditioning facility,
one would need the following:


Hydraulic Chimer Machine

Motor             : 1 unit 3 HP gear motor 
Machine Size      : 2.62m(L) x 0.92m(W) x 1.22m(H)
Gross Weight      : 1500 kg
Production Rate   : 15 seconds per drum
Hydraulic system  : 1 unit 3 HP hydraulic motor
                  : 1 unit 3 HP hydraulic piston
Electrical Supply : 20 amp


Hydraulic Horinzontal Dedenter Machine

Motor             : 1 unit 3 HP gear motor 
Machine Size      : 3.60m(L) x 0.77m(W) x 2.26m(H)
Gross Weight      : 2000 kg
Production Rate   : 25 seconds per drum
Hydraulic system  : 1 unit 3 HP hydraulic motor
                  : 2 unit hydraulic piston
Electrical Supply : 20 amp


External Washing Machine

Motor             : 3 units 1/2 HP motor
                    1 unit 3 HP motor   
Machine Size      : 6.4m(L) x 2m(W) x 2.5m(H)
Pump              : 3 units 1 HP pump
Gross Weight      : 3000 kg
Production Rate   : 25 seconds per drum
Electrical Supply : 35 amp


Internal Washing Machine With Hot Air Blower

Motor             : 1 unit 5.5 HP brake motor
                    1 unit 5.5 HP gear box   
Machine Size      : 10.35m(L) x 5.1m(W) x 1.23m(H)
Pump              : 8 units 5.5 HP 304 stainless steel pump
Gross Weight      : 4500 kg
Production Rate   : 120 drums per hour
Electrical Supply : 100 amp		


Automatic Spray Booth

Motor             : 1 unit 2 HP gear motor
                    1 unit 7.5 HP suction fan motor   
Machine Size      : 3.5m(L) x 2.2m(W) x 1.	9m(H)
Gross Weight      : 1500 kg
Production Rate   : 20 seconds per drum
Electrical Supply : 32 amp


Drum Oven

Motor             : 1 unit 3 HP gear motor
                    2 unit 5.5 HP section fan motor   
Machine Size      : 21m(L) x 3.6m(W) x 2.4m(H)
Gross Weight      : 6000 kg
Production Rate   : 25 seconds per drum
Electrical Supply : 60 amp


Upender & Conveyor

Air Cyclinder
Air Control Value
Conveyor Chain Roller
Motor            : 1 unit 1 HP gear motor
Machine Size     : 30m(L) x 30m(W) x 0.6m(H)
Elecrical Supply : 15 amp


Hydraulic Vertical Dedenter Machine

Motor             : 1 unit 2 HP brake motor
                    1 unit 3 HP gear motor   
Machine Size      : 1.2m(L) x 1.80m(W) x 2.35m(H)
Gross Weight      : 2500 kg
Production Rate   : 20 seconds per drum
Hydraulic System  : 3 HP motor hydraulic value
                    2 pcs hydraulic piston
Electrical Supply : 32 amp